Cartridge dust collector has below characters: 1. because the filter material can fold with density layout, structure is compact, small size, filter material performance require high rigidity. 2. The height of cartridge is not so high with easy installation, and seldom maintaining. 3. With smaller filtration velocity, it was produced little resistance.
Cartridge filter is consisted with inlet tube, exhausted tube, ash tank; de-dust device, cartridge and electric control device. In the inner part, filter cartridge can layout both tilt and vertical. The filter of cartridge dust collector is cartridge. Cartridge is consisted with top cover, steel structure, fold shape filter material and basement.
Technical performance:
LW(horizontal)series:
| model Item | 3 lines | 4 lines |
| △no. of cartridge n/pc | 12 | 16 |
| △air flow(m³/h) | 2500～6800 | 3300～9000 |
| Filtration velocity(m/min) | 0.4～0.7 | 0.4～0.7 |
| Dust content(mg/m³) | 0.2～2 | 0.2～2 |
| Resistance (Pa) | 700～1000 | 700～1000 |
| Efficiency (%) | 99.99 | 99.99 |
| △consumption(m³/min) | 0.45～0.7 | 0.6～1.0 |
LL(vertical)series:
| model Item | 3 lines | 4 lines | 5 lines |
| △no. of cartridge n/pc | 6 | 8 | 10 |
| △air flow(m³/h) | 1900～5000 | 2500～6900 | 3000～8600 |
| Filtration velocity(m/min) | 0.5～0.7 | 0.5～0.7 | 0.45～0.7 |
| Dust content(mg/m³) | 0.5～5 | 0.5～5 | 0.5～5 |
| Resistance (Pa) | 700～1000 | 700～1000 | 700～1000 |
| Efficiency (%) | 99.99 | 99.99 | 99.99 |
| △consumption(m³/min) | 0.5～0.8 | 0.7～1.0 | 0.9～1.3 |
Remark:1,during combination, the parameter with “△”should times (*)the parameter with “n”；
2,each room has single line cartridge, that means install 2 in series；
3,the pressure of compress air is 0.5～0.7MPa.
product picture:
